{"id":3485,"date":"2026-10-09T15:22:06","date_gmt":"2026-10-09T07:22:06","guid":{"rendered":"http:\/\/www.unmarinoenlaorilla.com\/blog\/?p=3485"},"modified":"2026-10-09T15:22:06","modified_gmt":"2026-10-09T07:22:06","slug":"are-cable-gland-accessories-available-in-metric-sizes-4f88-e9a495","status":"publish","type":"post","link":"http:\/\/www.unmarinoenlaorilla.com\/blog\/2026\/10\/09\/are-cable-gland-accessories-available-in-metric-sizes-4f88-e9a495\/","title":{"rendered":"Are cable gland accessories available in metric sizes?"},"content":{"rendered":"

Hey everyone, let\u2019s cut to the chase because I get this question ALL the time at my cable gland accessory shop: are metric-sized cable gland accessories even a thing? The short answer is \u2014 hell yeah, they are \u2014 but there\u2019s way more to it than just \u201cyes\u201d when you\u2019re sourcing parts that fit properly and don\u2019t waste your time or money. For anyone who\u2019s ever messed up a project because they grabbed a random component that \u201clooked like it might fit\u201d and ended up with a loose connection that sparked (or worse), this post is for you. I\u2019m not here to spit out technical jargon that sounds like my company\u2019s 2024 product manual \u2014 I\u2019m here to tell you what I actually see every day when folks call, email, or slide into our DMs panicking because they ordered the wrong size parts and missed their deadline. Cable Gland Accessories<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the basics that most people mix up: imperial vs. metric. If you\u2019ve been in the industrial, electrical, or construction game in the U.S. for years, you\u2019re probably used to inches, 1\/8 NPT threads, and parts sized to fit those. But step foot in Europe, Asia, most of the rest of the world, and even a growing chunk of U.S. manufacturing facilities, and you\u2019re dealing with metric units: millimeters, M-threaded parts, and mm-sized cable outer diameters. The big, expensive mistake I see companies make? Assuming all cable gland accessories come in imperial, so they just order the same size they\u2019ve always used \u2014 until they get parts that are either too small to thread on, so loose they fall off mid-install, or force them to hack a perfect seal with silicone that will fail in 6 months.<\/p>\n

So, back to the original question: are metric sizes available? Let\u2019s talk about what \u201cmetric cable gland accessories\u201d actually means, because it\u2019s not just one part. The main stuff folks need are metric cable glands, metric locknuts, metric sealing rings, grommets, grounding lugs, strain relief components, and even special adapters that let you switch between metric and imperial threads if you need to cross both systems. Every single one of these parts comes in a range of metric sizes \u2014 from tiny M12 glands for small electrical sensors and IoT devices all the way up to M63+ for heavy-duty industrial wiring and high-power applications. I see all sizes go through our shop, from a startup with a garage full of M16 glands for their new sensor line to a big construction firm needing 200 M40 locking nuts for a subway station project.<\/p>\n

But here\u2019s the thing a lot of people don\u2019t realize: not all suppliers actually stock metric cable gland accessories. I\u2019ve had customers reach out to me after ordering from a big-box industrial site or a random overseas seller on Amazon, complaining that the parts they got were \u201cmetric\u201d but didn\u2019t fit their M20 thread. Turns out, the seller listed them as metric but they were just labeled in mm but had sloppy thread tolerance, or they were the wrong pitch (wait \u2014 right! Thread pitch is a huge part of this that I almost forgot to mention. A lot of new folks mix up M20 x 1.5 vs. M20 x 2, and if you grab the wrong pitch, it won\u2019t thread at all, even if both are \u201cmetric\u201d). That\u2019s why at our company, we test every single metric accessory we stock to make sure the thread pitch matches international standards \u2014 we don\u2019t sell parts that come close, we sell parts that fit exactly like they should.<\/p>\n

Let\u2019s get into real-world scenarios to make this make sense, because nobody cares about specs without context. Last month, I got a call from a small electrical contractor based in Texas \u2014 let\u2019s call him Jake, no need to use his real name. He\u2019d been working on a commercial HVAC project, and had ordered imperial cable glands for 1.5-inch outer diameter (OD) power cables, but halfway through, the client switched to a European-made control panel that required metric glands. He\u2019d ordered from a supplier who said they had \u201cmetric cable glands\u201d but only had M25 x 1.5, which was too small for his 1.5-inch cable (wait, convert that \u2014 1.5 inches is ~38.1mm, so he needed a way bigger M size). He was 2 days away from a deadline, and the supplier wanted 2 weeks for a rush order. Luckily, we had M40 x 1.5 glands with matching metric locknuts and sealing rings in stock \u2014 we packed them up same-day, and he made the install without missing a beat. That\u2019s the kind of thing I live for, by the way \u2014 fixing someone\u2019s last-minute mess because they didn\u2019t confirm their metric size needs with a knowledgeable supplier.<\/p>\n

Another common question: do metric cable gland accessories work with non-metric equipment? Short answer: yes, but only if you use the right adapters. I mentioned thread pitch earlier, and that\u2019s where adapters come in. For example, if you have a piece of U.S.-made machinery with a 1\/2 NPT imperial thread, but you need a metric cable gland to fit a metric-sized cable, we sell M20 x 1.5 to 1\/2 NPT adapters that thread perfectly. No hacks, no silicone, no guesswork. We also carry reducer adapters that let you go from a larger metric thread (like M50) down to a smaller one (M25) if you have a mix of cable sizes in one panel. That\u2019s a huge win for companies that work with both imported and domestic gear \u2014 no more stocking two separate sets of glands when one adapter does the trick.<\/p>\n

What about different material types? Because not all metric cable gland accessories are made the same. I\u2019m talking brass (for high-temperature, heavy-duty applications), nylon (lightweight, corrosion-resistant, perfect for outdoor or marine use), stainless steel (for extreme environments like chemical plants or offshore drilling), and even IP-rated versions for wet or dusty areas. All of these come in metric sizes, too. A lot of people assume only brass glands are metric, but we stock nylon metric glands that are 100% waterproof, great for outdoor LED lighting or garden irrigation systems, and stainless steel metric glands for food processing plants where corrosion resistance is non-negotiable. Last quarter, a food equipment manufacturer ordered 500 M32 stainless steel metric glands for a new line of conveyor belt sensors \u2014 they needed them to meet FDA food safety standards, and metric sizes were required per their product specs. We had them in stock, shipped them out, and they had no issues.<\/p>\n

Now, let\u2019s talk about the fine print that trips people up: standards. The International Electrotechnical Commission (IEC) sets the global standards for cable glands, including metric sizes, so any reputable supplier\u2019s metric accessories should comply with IEC 60529 ratings for ingress protection. That means if a gland is rated IP68, it\u2019s going to keep water and dust out no matter what size your cable is, as long as you get the right metric matching. I\u2019ve had customers ask me \u201cwhat if I buy a cheap metric gland from a random site and it\u2019s not IP-rated?\u201d \u2014 answer: it won\u2019t hold up. We only sell metric accessories that meet IEC standards, because cutting corners on that is how you get a call at 2 a.m. from someone whose system failed because water got in, costing them thousands in downtime.<\/p>\n

Wait, also, let\u2019s address the elephant in the room: why do some suppliers act like metric sizes are hard to come by? Honestly, a lot of small suppliers just don\u2019t invest in stocking a full range of metric parts \u2014 they stick to what they know, which is mostly imperial for the U.S. market, and only order metric when someone asks, which means long wait times. That\u2019s why our company stocks over 200 different metric cable gland accessories, in sizes from M8 all the way up to M75, in all material types and IP ratings, so when a customer calls, we can ship same-day, no waiting 2 weeks for special orders.<\/p>\n

Let me wrap this up with a quick recap, because I know some of you skim to the end: yes, metric cable gland accessories are absolutely available. They come in all common sizes, all material types, for every application from tiny IoT sensors to heavy industrial machinery. The biggest mistakes people make are: 1) not confirming the exact metric size (thread pitch + cable OD) they need, 2) buying from a supplier that doesn\u2019t actually stock reputable, standard-compliant metric parts, and 3) assuming metric parts won\u2019t work with imperial equipment (they do, with the right adapters).<\/p>\n

<\/p>\n

If you\u2019re tired of missing deadlines because of ill-fitting cable glands, wasting money on parts that don\u2019t meet your specs, or dealing with downtime from cheap, non-compliant accessories, hit us up to chat through your project. We don\u2019t do pushy sales tactics \u2014 we just answer questions, tell you exactly what you need, and ship it fast. No guesswork, no hidden fees, no parts that \u201csort of\u201d fit.<\/p>\n

Metal Flexible Conduit<\/a> \u53c2\u8003\u6587\u732e
\nInternational Electrotechnical Commission. (2021). IEC 60529: Degrees of protection provided by enclosures (IP Code).
\nNational Electrical Manufacturers Association. (2022). NECA Standard for Cable Glands and Accessories.
\nIndustrial Maintenance and Plant Operations Magazine. (2023). Guide to Metric vs. Imperial Cable Glands: Common Mistakes and Solutions.<\/p>\n

\n

Hangzhou Gordon Electric Co., Ltd.<\/a>
Hangzhou Gordon Electric Co., Ltd. is well-known as one of the leading cable gland accessories manufacturers and suppliers in China. We warmly welcome you to wholesale high quality cable gland accessories at competitive price from our factory. For custom service, contact us now.
Address: No.173 Xingqiao North Road, Yuhang District, Hangzhou, Zhejiang 31100, China
E-mail: jeson@gordon-elec.com
WebSite: https:\/\/www.gordon-elec.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Hey everyone, let\u2019s cut to the chase because I get this question ALL the time at … Are cable gland accessories available in metric sizes?<\/span>Read more<\/a><\/p>\n","protected":false},"author":287,"featured_media":3485,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3448],"class_list":["post-3485","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-cable-gland-accessories-4fc6-e9ec8e"],"_links":{"self":[{"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/posts\/3485","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/users\/287"}],"replies":[{"embeddable":true,"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/comments?post=3485"}],"version-history":[{"count":0,"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/posts\/3485\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/posts\/3485"}],"wp:attachment":[{"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/media?parent=3485"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/categories?post=3485"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.unmarinoenlaorilla.com\/blog\/wp-json\/wp\/v2\/tags?post=3485"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}